Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/66230
Registo completo
Campo DC | Valor | Idioma |
---|---|---|
dc.contributor.author | Simões, V. M. | por |
dc.contributor.author | Neto, D. M. | por |
dc.contributor.author | Oliveira, M. C. | por |
dc.contributor.author | Alves, J. L. | por |
dc.contributor.author | Laurent, H. | por |
dc.contributor.author | Menezes, L. F. | por |
dc.date.accessioned | 2020-08-03T15:42:58Z | - |
dc.date.available | 2020-08-03T15:42:58Z | - |
dc.date.issued | 2018 | - |
dc.identifier.issn | 1742-6588 | - |
dc.identifier.uri | https://hdl.handle.net/1822/66230 | - |
dc.description.abstract | Both the plastic deformation and the friction forces generate heat in sheet metal forming processes. This yields a temperature rise on the blank and tools, which is mainly dictated by the blank properties and the press speed. Although modest values of temperature rise yield negligible changes in the mechanical behavior of metals, the lubricant properties are rather influenced by the temperature. Thus, the deep drawing of an aluminum cylindrical cup was selected to evaluate, experimentally and numerically, the temperature variation of the forming tools and blank at room temperature. Different values of punch speed are compared to evaluate the impact of the heat losses to the environment. The experimental results show that the temperature rise on the die surface is higher than 9°C when the punch speed is 10 mm/s. The temperature is underestimated by the finite element model due to the isothermal conditions imposed on the forming tools. | por |
dc.description.sponsorship | Fundação para a Ciência e a Tecnologia(SFRH/BPD/101334/2014) | por |
dc.language.iso | eng | por |
dc.publisher | IOP Publishing | por |
dc.relation | SFRH/BPD/101334/2014 | por |
dc.rights | openAccess | por |
dc.title | Temperature analysis during the drawing of an aluminum cylindrical cup | por |
dc.type | conferencePaper | por |
dc.peerreviewed | yes | por |
dc.relation.publisherversion | https://iopscience.iop.org/article/10.1088/1742-6596/1063/1/012137 | por |
oaire.citationIssue | 1 | por |
oaire.citationVolume | 1063 | por |
dc.identifier.doi | 10.1088/1742-6596/1063/1/012137 | por |
dc.subject.wos | Science & Technology | por |
sdum.journal | Journal of Physics: Conference Series | por |
sdum.conferencePublication | NUMISHEET 2018: 11TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES | por |
Aparece nas coleções: | CMEMS - Artigos em livros de atas/Papers in proceedings |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Simoes_2018_J._Phys. _Conf._Ser._1063_012137.pdf | 1,63 MB | Adobe PDF | Ver/Abrir |