A new strategy for xylanase production using wheat straw autohydrolysis liquor as substrate

Abstract

Agro-industrial residues are lignocellulosic materials with a high content of cellulose, hemicellulose and lignin. If such residues can be produced in bioprocesses (e.g. xylanase production) there is an attractive possibility of their integral use in biotechnological processes. In general, xylanase biosynthesis is induced by its substrate – xylan, but the high xylan content of some wastes such as corn cobs and wheat bran makes them an accessible and cheap source of inducers. Another alternative to improve the xylanase production, which is the main goal of this work, is the treatment of lignocellulosic materials in autohydrolysis processes which, under optimized conditions, lead to the solubilization of hemicelluloses (liquid phase, liquor) that may be favorable to xylanase production. The inclusion of these components in the nutrient medium composition can be a strategy to optimize the microbial xylanase biosynthesis. The best conditions for xylanase production were observed when the microorganism was cultivated in birchwood xylan for 6 days; however, satisfactory results were obtained using a combination of 1% wheat bran with 2% or 10% autohydrolysis liquor, for 5 days fermentation, once the xylanase production was around 86-87% of production with xylan. Besides, the obtained production with 100% wheat straw autohydrolysis liquor was also interesting, once after 7 days of cultivation, the xylanase production was higher than the ones obtained with wheat bran or by the combination of wheat bran and liquor.