Please use this identifier to cite or link to this item: https://hdl.handle.net/1822/67837

TitleDevelopment of a proposed single-phase series active power filter without external power sources
Author(s)Torre, Joao L.
Barros, Luis A. M.
Afonso, João L.
Pinto, J. G.
KeywordsActive Power Filters
Harmonics
Power Quality
Single-Phase Series Active Power Filter
Voltage Sags
Voltage Swells
Issue date2019
PublisherInstitute of Electrical and Electronics Engineers Inc.
CitationJ. L. Torre, L. A. M. Barros, J. L. Afonso and J. G. Pinto, "Development of a Proposed Single-Phase Series Active Power Filter without External Power Sources," 2019 International Conference on Smart Energy Systems and Technologies (SEST), Porto, Portugal, 2019, pp. 1-6, doi: 10.1109/SEST.2019.8849010.
Abstract(s)The quality of electric power is receiving more and more attention from part of consumers, Distribution System Operators (DSO), Transmission System Operators (TSO) and other competent entities related to the electrical power system. Once the electrical Power Quality (PQ) problems have direct implications for business productivity, causing high economic losses, it is mandatory to develop solutions that mitigate these problems. Active Power Filters (APFs) are power electronic equipment capable of compensating PQ problems that have the ability to dynamically adjust their modes of operation in response to changes in load or in the power system. Among these solutions, the Series Active Power Filter (SeAPF) is specially conceived to deal with problems related to the power system voltage amplitude and waveform. Despite the ability to compensate voltage sags, voltage swells, voltage harmonics, and voltage imbalances in three-phase systems, the SeAPF has not achieved much success neither has not been widely adopted. The lack of interest in this equipment can be largely justified by its high cost and also because of some limitations presented by the SeAPF conventional topology. In this paper is presented a novel topology, as well as the control algorithms of a single-phase SeAPF that is connected directly to the power grid without the use of coupling transformers and that does not require the use of external power sources. The topology and control algorithms of the SeAPF proposed in this paper were firstly evaluated by means of simulation results obtained with PSIM software and, once validated, a laboratory prototype was developed, being presented experimental results that support the correct operation of the proposed system.
TypeConference paper
URIhttps://hdl.handle.net/1822/67837
ISBN9781728111568
DOI10.1109/SEST.2019.8849010
Publisher versionhttps://ieeexplore.ieee.org/document/8849010
Peer-Reviewedyes
AccessOpen access
Appears in Collections:CAlg - Artigos em livros de atas/Papers in proceedings

Files in This Item:
File Description SizeFormat 
SeAPF_without_External_Power_Sources.pdf4,17 MBAdobe PDFView/Open

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu ORCID