Utilize este identificador para referenciar este registo: http://hdl.handle.net/1822/56286

TítuloDevelopment of non-orthogonal 3D-printed scaffolds to enhance their osteogenic performance
Autor(es)Fonseca, Diana R.
Sobreiro-Almeida, Rita
Sol, Paula Cristina Coutinho
Neves, N. M.
Palavras-chave3D printing
Non-orthogonality; bone
Tissue engineering
DataAbr-2018
EditoraThe Royal Society of Chemistry
RevistaBiomaterials Science
CitaçãoFonseca D. R., Sobreiro-Almeida R., Sol P. C., Neves N. M. Development of non-orthogonal 3D-printed scaffolds to enhance their osteogenic performance, Biomaterials Science, Vol. 6, Issue 6, pp. 1569-1579, doi:10.1039/c8bm00073e, 2018
Resumo(s)Three-dimensional (3D)-printed polycaprolactone (PCL)-based scaffolds have been extensively proposed for Tissue Engineering (TE) applications. Currently, the majority of the scaffolds produced are not representative of the complex arrangement of natural structures, since the internal morphologies follow an orthogonal and regular pattern. In order to produce scaffolds that more closely replicate the structure of the extracellular matrix (ECM) of tissues, herein both circular and sinusoidal scaffolds were fabricated and compared to their conventional orthogonal counterparts. This is an innovative, versatile and efficient strategy to 3D print PCL scaffolds with unique curved geometries. The morphology and the mechanical behavior of the scaffolds were assessed. The biological response was analyzed by evaluating the cell seeding efficiency, cell adhesion, proliferation, and osteogenic activity of an osteoblastic-like cell line seeded in these scaffolds. The scaffolds were designed and produced to have a similar porosity of about 56%. The non-orthogonal structures demonstrated lead to higher values of Young's modulus, both under dry conditions and when immersed in PBS. Moreover, the biological data corroborate that non-orthogonal scaffolds influence the cellular responses in a positive manner, namely in the osteogenic activity when compared with the orthogonal controls. These results suggest that introducing less orthogonal elements, which better mimic the tissue ECM and architecture, may have a positive influence on the cellular behavior, being a potential strategy to address bone tissue engineering applications.
Tipoarticle
DescriçãoEuropean Regional Development Fund (ERDF) on the project FROnTHERA (NORTE-01-0145-FEDER-000023), supported by the Norte Portugal Regional Operational Programme (NORTE 2020), under the PORTUGAL 2020 Partnership Agreement. This article was also supported by the Portuguese Foundation for Science and Technology (FCT), under the scope of the project SPARTAN (PTDC/CTM-BIO/4388/2014). The FCT Ph.D. Grant on the Doctoral Program on Advanced Therapies for Health (PATH) (PD/BD/128102/2016)
URIhttp://hdl.handle.net/1822/56286
DOI10.1039/c8bm00073e
ISSN2047-4830
e-ISSN2047-4830
Versão da editorahttps://pubs.rsc.org/en/content/articlehtml/2018/bm/c8bm00073e
Arbitragem científicayes
AcessorestrictedAccess
Aparece nas coleções:3B’s - Artigos em revistas/Papers in scientific journals

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
19548-Paper Final.pdf449,79 kBAdobe PDFVer/Abrir  Solicitar cópia ao autor!

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu Currículo DeGóis