Utilize este identificador para referenciar este registo: http://hdl.handle.net/1822/42481

Registo completo
Campo DCValorIdioma
dc.contributor.authorBarros, Alexandre António Antunespor
dc.contributor.authorOliveira, C.por
dc.contributor.authorLima, Estêvão Augusto Rodrigues depor
dc.contributor.authorDuarte, Ana Rita C.por
dc.contributor.authorReis, R. L.por
dc.date.accessioned2016-09-07T10:42:55Z-
dc.date.available2016-09-07T10:42:55Z-
dc.date.issued2016-
dc.date.submitted2016-
dc.identifier.citationBarros A. A., Oliveira C., Lima E., Duarte A. R. C., Reis R. L. Gelatin-based biodegradable ureteral stents with enhanced mechanical properties, Applied Materials Today, Vol. 9, pp. 9-18, doi:10.1016/j.apmt.2016.07.006, 2016por
dc.identifier.issn2352-9407por
dc.identifier.urihttp://hdl.handle.net/1822/42481-
dc.description.abstractA first generation of biodegradable ureteral stents based on natural origin polymers developed in a previous work has proven to be an interesting alternative to conventional stents, but it has however demonstrated to fail upon the first in vivo validation in a pig model. In this work, with the objective to overcome the low mechanical performance encountered and to make the biodegradable ureteral stents by origin polymers a success in vivo, four formulations with different concentrations of gelatin and alginate and different concentrations of crosslinking agent were tested in order to obtain higher mechanical properties. Bismuth was added to confer radiopaque properties to the stent. Not only a new formulation was developed but also the processing method to fabricate the stents was optimized. The biodegradable ureteral stents were coated with a biodegradable polymer. X-ray scan demonstrated the radiopacity of this second generation of biodegradable stents. The degradation of the biodegradable ureteral stents was assessed in artificial urine solution and it was observed that the degradation of the materials occurs in vitro between 9 and 15 days. Degradation was followed by weight loss of the samples and by chemical analysis of the solutions both by inductive couple plasma (ICP) and gel permeation chromatography (GPC). Formulation with highest amount of gelatin has shown good mechanical performance in terms of tensile properties when compared with the commercial stent (Biosoft® duo, Porges, Coloplast), and the crosslinking concentration has shown not to have a great influence on the mechanical behavior of the stents. The in vivo performance of this second-generation of the ureteral stents was herein validated. The biodegradable ureteral stents were placed in the ureters of a female pig, following the normal surgical procedure. The animals remained asymptomatic, with normal urine flow, the stents remain intact during the first 3 days and after 10 days the ureteral stents were totally degraded. This new formulation combined with a new production process overcomes the problems verified with the first generation of natural-based biodegradable stents.por
dc.description.sponsorshipThe research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement number REGPOT-CT2012-316331-POLARIS and from the project "Novel smart and biomimetic materials for innovative regenerative medicine approaches" RL1 - ABMR - NORTE-01-0124-FEDER-000016) cofinanced by North Portugal Regional Operational Programme (ON.2 - 0 Novo Norte), under the National Strategic Reference Framework (NSRF), through the European Regional Development Fund (ERDF). Alexandre Barros acknowledges his FCT PhD grant SFRH/BD/97203/2013.por
dc.language.isoengpor
dc.publisherElsevierpor
dc.relationinfo:eu-repo/grantAgreement/FCT/SFRH/SFRH%2FBD%2F97203%2F2013/PT-
dc.rightsopenAccesspor
dc.subjectBiodegradablepor
dc.subjectMechanical propertiespor
dc.subjectUreteral stentspor
dc.subjectGelatin-basedpor
dc.subjectHydrogelpor
dc.titleGelatin-based biodegradable ureteral stents with enhanced mechanical propertiespor
dc.typearticle-
dc.peerreviewedyespor
dc.relation.publisherversionhttp://www.sciencedirect.com/science/article/pii/S2352940716300415#por
dc.commentshttp://3bs.uminho.pt/node/18801por
dc.publicationstatusinfo:eu-repo/semantics/publishedVersionpor
degois.publication.firstPage9por
degois.publication.lastPage18por
degois.publication.titleApplied Materials Todaypor
degois.publication.volume5por
dc.date.updated2016-09-05T15:48:28Z-
dc.identifier.doi10.1016/j.apmt.2016.07.006por
dc.subject.wosScience & Technologypor
sdum.journalApplied Materials Todaypor
Aparece nas coleções:3B’s - Artigos em revistas/Papers in scientific journals

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
1-s2.0-S2352940716300415-main.pdf1,87 MBAdobe PDFVer/Abrir

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu Currículo DeGóis