Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/37009
Título: | The plasticating sequence In barrier extrusion screws part II: Experimental assessment |
Autor(es): | Gaspar-Cunha, A. Covas, J. A. |
Palavras-chave: | Single screw extrusion Barrier screws Melting Modeling |
Data: | 2014 |
Editora: | Taylor and Francis |
Revista: | Polymer - Plastics Technology and Engineering |
Citação: | A. Gaspar-Cunha & J. A. Covas (2014) The Plasticating Sequence in Barrier Extrusion Screws Part II: Experimental Assessment, Polymer-Plastics Technology and Engineering, 53:14, 1456-1466, DOI: 10.1080/03602559.2014.909482 |
Resumo(s): | A modular laboratorial single screw extruder was used to perform screw pulling experiments and generate data on the development of plasticating of two polymers along the axis of a Maillefer barrier screw. The effects of the presence of the barrier (by comparison with an equivalent conventional 3-zone screw), of its geometrical parameters and of operating conditions were investigated and compared to the predictions provided by a previously developed computational model. Although the small size of the extruder influenced solids conveying and induced premature and quick melting, the two sets of data were generally in satisfactory agreement. |
Tipo: | Artigo |
URI: | https://hdl.handle.net/1822/37009 |
DOI: | 10.1080/03602559.2014.909482 |
ISSN: | 0360-2559 1525-6111 |
Arbitragem científica: | yes |
Acesso: | Acesso restrito UMinho |
Aparece nas coleções: | IPC - Artigos em revistas científicas internacionais com arbitragem |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
s1-ln1707927322507065-1939656818Hwf-305512145IdV-107988295717079273PDF_HI0001.pdf Acesso restrito! | 1,07 MB | Adobe PDF | Ver/Abrir |