Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/26725
Título: | Studies on the mouldability of structural foams |
Autor(es): | Nogueira, A. A. Gago, P. T. Martinho, P. G. Brito, A. M. Pouzada, A. S. |
Palavras-chave: | Hybrid moulds Structural foams Rapid prototyping techniques Low pressure injection moulding Reaction injection mould |
Data: | Out-2013 |
Editora: | University of Maribor |
Revista: | Advances in Production Engineering and Management |
Citação: | NOGUEIRA A. A.; MARTINHO, P. G.; BRITO, A. M.; POUZADA, A.S. – Studies on the mouldability of structural foams in hybrid moulds, Advances in Production Engineering & Management, Vol. 8 issue 2 (2013) pp 134–142. |
Resumo(s): | In the context of the research project Hybridmould 21, studies on the mouldability of structural foams using hybrid moulds have been carried out. Hybrid injection moulds are considered as an alternative for prototype series or short production runs of large parts. In hybrid moulds the moulding elements (blocks or other inserts) are manufactured in alternative metallic materials or synthetic materials typically using in rapid prototyping. Thermoplastic structural foams are moulded by injection moulding using injection pressures lower than in than in conventional injection moulding. The structural foam results from a dispersed gaseous phase, which derives from the expansion of a chemical blowing agent usually compounded in a masterbatch. In this project, thermoplastics and thermosets were used (PP, ABS and PUR) using a hybrid mould instrumented for temperature, pressure and expansion force. The moulding block was manufactured by vacuum casting of an epoxy composite. In this paper are mainly discussed the results obtained on liquid injection moulding polyurethane resins in the hybrid mould. |
Tipo: | Artigo |
URI: | https://hdl.handle.net/1822/26725 |
ISSN: | 1854-6250 |
Versão da editora: | The original publication is available at apem-journal.org |
Arbitragem científica: | yes |
Acesso: | Acesso restrito UMinho |
Aparece nas coleções: | IPC - Artigos em revistas científicas internacionais com arbitragem |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
APEM 8(2) 2013 pp 134-142 - Nogueira.pdf Acesso restrito! | Documento principal | 2,1 MB | Adobe PDF | Ver/Abrir |