Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/22049
Registo completo
Campo DC | Valor | Idioma |
---|---|---|
dc.contributor.author | Rocha, R. P. | - |
dc.contributor.author | Carmo, João Paulo Pereira | - |
dc.contributor.author | Gomes, J. M. | - |
dc.contributor.author | Belsley, M. | - |
dc.contributor.author | Correia, J. H. | - |
dc.date.accessioned | 2012-12-21T17:59:04Z | - |
dc.date.available | 2012-12-21T17:59:04Z | - |
dc.date.issued | 2012 | - |
dc.identifier.issn | 1877-7058 | por |
dc.identifier.uri | https://hdl.handle.net/1822/22049 | - |
dc.description.abstract | In this paper is presented a fabrication process for obtaining refractive microlenses arrays with high reproducibility and low cost. This process was specifically optimized for the AZ4562 photoresist. Functional prototypes of microlenses arrays with dimensions in the range of 30 m, 4.9 mm and 5 m for width, length and thickness, respectively, were fabricated and tested. The pre-thermal reflow spacing between adjacent isosceles trapezoids is 1.35-5.43 m, from bottom to top, respectively. This separation allows the photoresist to reflow and join the adjacent microlens creating a consistent and homogeneous array. | por |
dc.description.sponsorship | This work and Rui Pedro Rocha are fully supported by the Portuguese Foundation for Science and Technology under the project FCT/PTDC/EEA-ELC/109936/2009 and the financial grant SFRH/BD/33733/2009, respectively. The authors would also like to acknowledge Dr.-Ing Christian Koch from MicroChemicals GmbH for the technical support. | por |
dc.language.iso | eng | por |
dc.publisher | Elsevier 1 | por |
dc.rights | openAccess | por |
dc.subject | Microlens | por |
dc.subject | Thermal reflow | por |
dc.subject | Photoresist AZ4562 | por |
dc.subject | Stereocopic image formation | por |
dc.title | Microlenses array made with AZ4562 photoresist for stereoscopic acquisition | por |
dc.type | conferencePaper | por |
dc.peerreviewed | yes | por |
sdum.publicationstatus | published | por |
oaire.citationStartPage | 619 | por |
oaire.citationEndPage | 622 | por |
oaire.citationConferencePlace | Cracóvia, Polónia | por |
oaire.citationTitle | Eurosensors XXVI | por |
oaire.citationVolume | 47 | por |
dc.identifier.doi | 10.1016/j.proeng.2012.09.223 | por |
dc.subject.wos | Science & Technology | por |
sdum.journal | Procedia Engineering | por |
sdum.conferencePublication | Eurosensors XXVI | por |
Aparece nas coleções: |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
PT7-10.pdf | Artigo da conferência | 370,34 kB | Adobe PDF | Ver/Abrir |