Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/89222
Título: | 3D reconstruction of building model using UAV point clouds |
Autor(es): | Sani, Nor Hanani Tahar, Khairul Nizam Maharjan, Gyanu Raja Matos, José C. Muhammad, Muizzuddin |
Palavras-chave: | 3D model Point cloud Precision UAV |
Data: | 2022 |
Editora: | Copernicus Gesellschaft Mbh |
Revista: | International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences |
Resumo(s): | Photo-realistic 3D model of object cannot be created by using conventional Total Station method. The aim of this study is to generate 3D building model using UAV's dense point clouds. In this research, the ability of remotely detected information for the construction of 3D building models is found to be as specific as UAV datasets, Tacheometry Survey and Traverse Survey. Pix4D and MeshLab software were used in this study to perform image processing of 3D building. The building was built up upon using the information needed from capturing UAV images. This procedure requires the height of building to be measured through conventional method such that of UAV and the height is then compared with a 3D building model. At the end of the process, the comparison of height of building, also known as RMSE, was conducted. The images of building were then processed in Photogrammetry which is the Pix4D software. Using Pix4D, this study proceeded with several processing stages such as camera calibration, photo uploading, building of dense cloud, mesh generation, and model texturing. Those processes were done automatically by using Pix4D tools. High quality of photo-realistic 3D model of building was then successfully constructed. The accuracy assessment was done by comparing the measurement of 3D model of building. Direct measuring of building by using total station had taken place to compare the measurements between 3D model details with actual measurements. The measurement of 3D model of building was done in Pix4D software. The RMSE achieved in this study is 0.015 m which is under reasonable accuracy limit. This study proves that UAV point cloud is capable to produce a very fine 3D model. |
Tipo: | Artigo em ata de conferência |
URI: | https://hdl.handle.net/1822/89222 |
DOI: | 10.5194/isprs-archives-XLIII-B2-2022-455-2022 |
ISSN: | 1682-1750 |
Versão da editora: | https://doi.org/10.5194/isprs-archives-XLIII-B2-2022-455-2022 |
Arbitragem científica: | yes |
Acesso: | Acesso aberto |
Aparece nas coleções: | ISISE - Comunicações a Conferências Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
isprs-archives-XLIII-B2-2022-455-2022.pdf | 2,49 MB | Adobe PDF | Ver/Abrir |