Please use this identifier to cite or link to this item: http://hdl.handle.net/1822/58436

Full metadata record
DC FieldValueLanguage
dc.contributor.authorDalalbashi, Alipor
dc.contributor.authorGhiassi, Bahmanpor
dc.contributor.authorOliveira, Daniel V.por
dc.contributor.authorFreitas, Anapor
dc.date.accessioned2019-01-22T10:11:21Z-
dc.date.issued2018-06-15-
dc.date.submitted2017-12-
dc.identifier.citationDalalbashi, A., Ghiassi, B., Oliveira, D. V., & Freitas, A. (2018). Effect of test setup on the fiber-to-mortar pull-out response in TRM composites: Experimental and analytical modeling. Composites Part B: Engineering, 143, 250-268por
dc.identifier.issn1359-8368por
dc.identifier.urihttp://hdl.handle.net/1822/58436-
dc.description.abstractTextile-reinforced mortars (TRM) have recently received significant attention for the externally bonded reinforcement (EBR) of masonry and reinforced concrete structures. The fiber-to-mortar bond, the TRM-to-substrate bond, and the mechanical properties of the TRM constituents have a fundamental role in the performance of this strengthening technique and therefore require special attention. Despite this importance, only few investigations are devoted to characterization of the single fiber-to-mortar bond response in these systems.This paper, as an step towards addressing the fiber-to-mortar bond, presents a combined experimental and analytical investigation on the effect of test setup on the pull-out response and bond-slip laws in TRM composites. Three different pull-out test setups, consisting of one pull-pull and two pull-push configurations, are developed and investigated for characterization of the single fiber-to-mortar bond behavior. The experimental and analytical results are critically discussed and presented and bond-slip laws are extracted for each test setup.por
dc.description.sponsorship- This work was partly financed by FEDER funds through the Competitivity Factors Operational Programme (COMPETE) and by national funds through the Foundation for Science and Technology (FCT) within the scope of project POCI-01-0145-FEDER-007633. The support to the first author through grant SFRH/BD/131282/2017 is acknowledged. The second author acknowledges the financial support of the European Union's Marie Curie Individual Fellowship program under REA grant agreement No. 701531.por
dc.language.isoengpor
dc.publisherElsevierpor
dc.rightsclosedAccesspor
dc.subjectFiber/matrix bondpor
dc.subjectMechanical testingpor
dc.subjectAnalytical modelingpor
dc.subjectTextile-reinforced mortar (TRM)por
dc.titleEffect of test setup on the fiber-to-mortar pull-out response in TRM composites: Experimental and analytical modelingpor
dc.typearticle-
dc.peerreviewedyespor
dc.relation.publisherversionhttps://www.sciencedirect.com/science/article/pii/S1359836817343421por
degois.publication.firstPage250por
degois.publication.lastPage268por
degois.publication.volume143por
dc.date.updated2019-01-22T00:11:45Z-
dc.identifier.doi10.1016/j.compositesb.2018.02.010por
dc.subject.fosEngenharia e Tecnologia::Engenharia Civilpor
dc.description.publicationversioninfo:eu-repo/semantics/publishedVersionpor
dc.subject.wosScience & Technology-
sdum.export.identifier5290-
sdum.journalComposites Part B: Engineeringpor
Appears in Collections:ISISE - Artigos em Revistas Internacionais


Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu Currículo DeGóis