Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/38756
Título: | Seismic retrofit of masonry-to-timber connections in historical constructions |
Autor(es): | Moreira, Susana Maria Trindade |
Orientador(es): | Ramos, Luís F. Oliveira, Daniel V. |
Data: | 15-Jul-2015 |
Resumo(s): | Proper structural connections play an important role in ensuring seismic loads distribution
and developing global damage mechanisms of structures. In unreinforced masonry buildings,
effective connections between masonry walls and timber floors or walls through the use of
anchors can prevent the occurrence of out-of-plane mechanisms and promote “box-like”
behavior. This thesis aimed at studying and developing seismic retrofit solutions for
connections between masonry walls and timber structural elements, such as floors and timber
framed walls, for historical unreinforced masonry buildings built in Lisbon, from the late 19th
century to the beginning of the 20th century. However, similarities concerning constructive
details of connections found on unreinforced masonry buildings across different countries,
bring the possibility of expanding the solutions under study to other contexts. The tasks carried
out focused on characterizing the tensile response of the connections, through an experimental
campaign followed by analytical development of the results.
Quasi-static monotonic and cyclic tests were carried out on pairs of injection anchors, to be
applied on masonry-to-timber elements connections, and on wall-to-floor connections
retrofitted with a system of steel tie rod with anchor plate. The pairs of injection anchors failed
by combined cone-bond failure, with strength capacity and shape of the envelopes being highly
influenced by the boundary conditions of the masonry wall. Hysteretic loops’ shape is mainly
influenced by bond slip at the grout/masonry interface, causing strength and stiffness
degradation, and pinching. Unstrengthened wall-to-floor specimens’ failure mechanism was
nails pullout, while for the strengthened ones was failure of the bolted connection between steel
angle and timber joist. The hysteretic behavior of the latter shared similarities with the one of
the injection anchors, but it was controlled by slip at the bolted connection. There were
considerable increases in maximum pullout force and dissipated energy, from unstrengthened
to strengthened wall-to-floor connections, and ductility was kept high as well.
From the experimental results, strength prediction formulae were studied and adapted to
better fit the results obtained and idealized curves were developed based on force-displacement
backbone curves. Existing behavior models provided good approximations to the experimental
results but further validation needs to be implemented. The trilinear curves provided better
approximations to the backbone curves, and ASCE/SEI 41-06 approach revealed to be very
conservative. Retrofit design and acceptance criteria regarding displacements, forces and
behavior factors were proposed. Ligações estruturais eficientes assumem um papel crítico na transmissão de solicitações sísmicas e no desenvolvimento de mecanismos globais de colapso, em detrimento de modos de rotura locais como derrubamento parcial ou total de paredes para fora do plano. Estes mecanismos para fora do plano das paredes são particularmente recorrentes e nefastos em edifícios antigos de alvenaria não armada, sendo necessário o desenvolvimento de soluções de reforço sísmico de ligações capazes de promover um comportamento de “caixa” de todo o edifício. Esta tese teve como objetivo principal colmatar esta necessidade e, para tal, focou-se em ligações entre paredes de alvenaria e pavimentos e paredes de madeira, existentes em edifícios contruídos em Lisboa, depois do terramoto de 1755 até ao início do século XX. Ensaios de arrancamento quase-estáticos monotónicos e cíclicos foram realizados em provetes constituídos por paredes de alvenaria e mangas injetadas e em provetes representativos de ligações piso-paredes, sem reforço e reforçados com tirantes e placas de ancoragem. Os pares de mangas injetadas romperam por combinação de cone de alvenaria com corte na interface alvenaria/grout, mas com diferentes contribuições dos mesmos, conforme a sua localização na parede. As forças de arrancamento e a forma das envolventes foram muito influenciadas pelas condições fronteiras da parede. No entanto, em todos os ensaios os ciclos histeréticos foram governados por escorregamento na interface alvenaria/grout, sendo caracterizados por perdas de força e rigidez entre ciclos, assim como mudanças de rigidez em carga e descarga. O mesmo se verificou para os ensaios realizados nos provetes piso-parede, sendo no entanto, o escorregamento na ligação aparafusada entre cantoneira e viga de madeira o responsável pelo comportamento histerético observado. O mecanismo de rotura verificado nos provetes pisoparede não reforçados foi o arrancamento dos pregos, enquanto nos provetes reforçados foi a rotura da ligação aparafusada. Houve um aumento da capacidade em força e da energia dissipada nos reforçados, sendo possível manter uma ductilidade elevada na ligação. Modelos de comportamento e respetivas expressões para a estimativa de forças máximas foram aplicados aos resultados experimentais, assim como foram desenvolvidas curvas idealizadas com base nas envolventes força-deslocamento. As expressões existentes permitem boas aproximações às forças obtidas experimentalmente, mas necessitam ser melhoradas. As envolventes ASCE/SEI 41-06 são bastante conservativas e as curvas trilineares constituem melhores aproximações às envolventes experimentais. Foram também propostos critérios de aceitação com base em deslocamentos e forças, assim como fatores de comportamento. |
Tipo: | Tese de doutoramento |
Descrição: | Tese de Doutoramento em Engenharia Civil. |
URI: | https://hdl.handle.net/1822/38756 |
Acesso: | Acesso aberto |
Aparece nas coleções: | ISISE - Teses de Doutoramento |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Thesis_Susana Maria Trindade Moreira_2015.pdf | 17,54 MB | Adobe PDF | Ver/Abrir |