Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/12360
Registo completo
Campo DC | Valor | Idioma |
---|---|---|
dc.contributor.author | Castro, André | - |
dc.contributor.author | Completo, António | - |
dc.contributor.author | Simões, José A. | - |
dc.contributor.author | Flores, Paulo | - |
dc.date.accessioned | 2011-05-06T14:45:13Z | - |
dc.date.available | 2011-05-06T14:45:13Z | - |
dc.date.issued | 2011 | - |
dc.identifier.citation | CONGRESSO NACIONAL DE BIOMECÂNICA, 4, Coimbra, Portugal, 2011 – “4º Congresso Nacional de Biomecânica.” [Coimbra : Sociedade Portuguesa de Biomecânica, 2011]. p. 561-566. | por |
dc.identifier.uri | https://hdl.handle.net/1822/12360 | - |
dc.description.abstract | One of the major reasons for the failure of currently available knee implants is the stress shielding effect. The implant acts as a “shield of loads”, which means that loads are not distributed throughout the bone tissue and, consequently, the rate of bone remodeling decreases. The purpose for this work was to analyze the influence of the geometry and rigidity of the bone-implant interface on the stress shielding effect and on the stability of the prosthesis, applying the Finite Element Method. The results showed that elastic strain is lower on bone areas close to the studied models of patellofemoral prosthesis, on the period after the implantation. When the lifetime of the implant advances, bone rupture by fatigue may occur, due to elevated strain, particularly on the models with fixation pins for the prosthesis. Additionally, contact analyses showed that stability is best promoted without fixation pins. | por |
dc.description.sponsorship | Fundação para a Ciência e a Tecnologia (FCT) - PTDC/EMEPME/67687/2006 "ProPaFe - Design and Development of a Patello-Femoral Prosthesis", bolsa de doutaramento SFRH/BD/63882/2009 | por |
dc.language.iso | por | por |
dc.rights | restrictedAccess | por |
dc.subject | Knee | por |
dc.subject | Patellofemoral arthroplasty | por |
dc.subject | Finite element model | por |
dc.subject | Stress shielding effect | por |
dc.title | Biomechancal response of new femoral components for patellofemoral arthroplasty | por |
dc.type | conferencePaper | - |
dc.peerreviewed | no | por |
sdum.publicationstatus | published | por |
oaire.citationConferenceDate | 4-5 Fev. 2011 | por |
sdum.event.type | congress | por |
oaire.citationStartPage | 561 | por |
oaire.citationEndPage | 566 | por |
oaire.citationConferencePlace | Coimbra, Portugal | por |
oaire.citationTitle | 4º Congresso Nacional de Biomecânica | por |
sdum.conferencePublication | 4º Congresso Nacional de Biomecânica | por |
Aparece nas coleções: | DEM - Publicações em actas de encontros científicos / Papers in conference proceedings |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
ACN33.pdf Acesso restrito! | Documento principal | 241,48 kB | Adobe PDF | Ver/Abrir |