Please use this identifier to cite or link to this item: http://hdl.handle.net/1822/60136

Full metadata record
DC FieldValueLanguage
dc.contributor.authorGonçalves, Jordana Catarina Carvalhopor
dc.contributor.authorLima, Patríciapor
dc.contributor.authorKrause, Beatepor
dc.contributor.authorPötschke, Petrapor
dc.contributor.authorLafont, Ugopor
dc.contributor.authorGomes, José R.por
dc.contributor.authorAbreu, Cristiano S.por
dc.contributor.authorPaiva, M. C.por
dc.contributor.authorCovas, J. A.por
dc.date.accessioned2019-04-17T17:18:53Z-
dc.date.available2019-04-17T17:18:53Z-
dc.date.issued2018-08-18-
dc.identifier.issn2073-4360-
dc.identifier.urihttp://hdl.handle.net/1822/60136-
dc.description.abstractThe present work reports the production and characterization of polyetheretherketone (PEEK) nanocomposite filaments incorporating carbon nanotubes (CNT) and graphite nanoplates (GnP), electrically conductive and suitable for fused deposition modeling (FDM) processing. The nanocomposites were manufactured by melt mixing and those presenting electrical conductivity near 10 S/m were selected for the production of filaments for FDM. The extruded filaments were characterized for mechanical and thermal conductivity, polymer crystallinity, thermal relaxation, nanoparticle dispersion, thermoelectric effect, and coefficient of friction. They presented electrical conductivity in the range of 1.5 to 13.1 S/m, as well as good mechanical performance and higher thermal conductivity compared to PEEK. The addition of GnP improved the composites’ melt processability, maintained the electrical conductivity at target level, and reduced the coefficient of friction by up to 60%. Finally, three-dimensional (3D) printed test specimens were produced, showing a Young’s modulus and ultimate tensile strength comparable to those of the filaments, but a lower strain at break and electrical conductivity. This was attributed to the presence of large voids in the part, revealing the need for 3D printing parameter optimization. Finally, filament production was up-scaled to kilogram scale maintaining the properties of the research-scale filaments.por
dc.description.sponsorshipMost of this study was performed under ESA Contract Nr. 4000116010/15/NL/FE.por
dc.language.isoengpor
dc.publisherMultidisciplinary Digital Publishing Institutepor
dc.rightsopenAccesspor
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/por
dc.subjectPEEKpor
dc.subjectcarbon nanotubespor
dc.subjectgraphite nanoplateletspor
dc.subjectnanocompositespor
dc.subjectfilamentspor
dc.subjectfused deposition modeling (FDM)por
dc.titleElectrically conductive polyetheretherketone nanocomposite filaments: from production to fused deposition modelingpor
dc.typearticlepor
dc.peerreviewedyespor
oaire.citationIssue8por
oaire.citationVolume10por
dc.date.updated2019-04-11T11:05:48Z-
dc.identifier.doi10.3390/polym10080925por
dc.description.publicationversioninfo:eu-repo/semantics/publishedVersionpor
dc.subject.wosScience & Technologypor
sdum.journalPolymerspor
Appears in Collections:BUM - MDPI

Files in This Item:
File Description SizeFormat 
polymers-10-00925.pdf5,54 MBAdobe PDFView/Open

This item is licensed under a Creative Commons License Creative Commons

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu ORCID