Please use this identifier to cite or link to this item: http://hdl.handle.net/1822/59302

TitleComparative mechano-morphological studies on polyamide 6 based single polymer laminate composites prepared by different reactive processing techniques
Author(s)Tohidi, Shafagh Dinparast
Rocha, Ana Maria
Dencheva, Nadya Vasileva
Engesser, Bernhard
Pouzada, A. S.
Denchev, Z.
KeywordsSingle-polymer composites
Polyamide 6
Laminate composites
Lactam polymerization
Issue date19-Sep-2018
Abstract(s)Single polymer composites (SPC) based on polyamide 6 (PA6) are developed via nylon reactive injection molding (NYRIM) or powder coating/compression molding (PCCM) in the presence of PA6 woven textile plies. The effect of fiber volume fraction of textile on the tensile properties of the SPC resulting from both molding techniques were investigated and compared. Polarizing light microscopy (PLM) was applied to detect a transcrystalline layer at the fiber-matrix interface. The results showed that applying PCCM technique increased the tensile modulus of SPC by ca. 50% as compared to the neat matrix component. Some SPC were reprocessed and the resulting PA6 molded plates showed morphology and mechanical properties very similar to those of commercial hydrolytic neat PA6. The thermal stability and crystallizability of both NYRIM and PCCM laminate systems was studied by means of TGA and DTA in the temperature range from 30ºC-550°C.
TypeConference paper
URIhttp://hdl.handle.net/1822/59302
Peer-Reviewedyes
AccessOpen access
Appears in Collections:IPC - Textos completos em actas de encontros científicos internacionais com arbitragem

Files in This Item:
File Description SizeFormat 
Shafagh-PMI.pdf1,02 MBAdobe PDFView/Open

This item is licensed under a Creative Commons License Creative Commons

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu ORCID