Utilize este identificador para referenciar este registo: http://hdl.handle.net/1822/49260

Título3D printing of polypropylene using the fused filament fabrication technique
Autor(es)Silva, A. F.
Carneiro, O. S.
Gomes, R.
Palavras-chave3D Printing
Fused filament fabrication
Polypropylene
Glass reinforced PP
Data2017
EditoraAIP Publishing
RevistaAIP Conference Proceedings
Resumo(s)This work addresses the potential of polypropylene, neat (PP) and reinforced with short glass fibers (GRPP), as a candidate for the Fused Filament Fabrication (FFF)-based 3D printing technique. The entire production chain was evaluated, i.e., starting with PP and GRPP pellets, filaments were produced by extrusion and test samples were printed in different process conditions (different layers’ thicknesses, deposition orientation and infill) with the in-house produced filaments. This strategy enabled a true comparison between parts printed (FFF) with parts manufactured by compression molding (CM), using exactly the same grade of raw material.
TipoconferencePaper
URIhttp://hdl.handle.net/1822/49260
ISBN978-0-7354-1580-5
DOI10.1063/1.5008040
ISSN0094-243X
Arbitragem científicayes
AcessoclosedAccess
Aparece nas coleções:IPC - Textos completos em actas de encontros científicos internacionais com arbitragem

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
AIP Artigo FFF.pdf340,38 kBAdobe PDFVer/Abrir  Solicitar cópia ao autor!

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu Currículo DeGóis