Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/43595
Título: | Influence of substrate temperature on the properties of pulsed laser deposited silver nanoparticle thin films and their application in SERS detection of bovine serum albumin |
Autor(es): | Kamakshi, Koppole Silva, J. P. B. Sekhar, K. C. Marslin, Gregory Moreira, J. Agostinho Conde, O. Almeida, A. Pereira, Mário Gomes, M. J. M. |
Data: | 2016 |
Editora: | Springer |
Revista: | Applied Physics B: Lasers and Optics |
Resumo(s): | The effect of substrate temperature (Ts) on electrical conductance, surface plasmon resonance (SPR), and surface-enhanced Raman scattering (SERS) activity of silver nanoparticle (AgNP) thin films is presented. AgNP films are grown on glass substrates by pulsed laser deposition in a controlled Ar atmosphere at a pressure of 0.1 mbar and varying Ts. Different Ts results in different morphologies, as observed by scanning electron microscopy. The effect of interparticle distance on the electrical conductance of AgNPs is highlighted. The current–voltage characteristics display negative resistance effect and is attributed to the charge trapping process in AgNPs. The film deposited at room temperature presents a SPR peak at λ = 460 nm, and its wavelength first increases until Ts reaches 300 °C and then decreases with further increasing Ts. The quantitative analysis of SERS studies reveals that SERS intensity of bovine serum albumin (BSA) adsorbed on AgNP substrate deposited at 300 °C exhibits a higher intensity as compared with that of BSA adsorbed on the SERS active substrates at any other Ts. |
Tipo: | Artigo |
URI: | https://hdl.handle.net/1822/43595 |
DOI: | 10.1007/s00340-016-6385-0 |
ISSN: | 0946-2171 1432-0649 |
Versão da editora: | http://link.springer.com/article/10.1007/s00340-016-6385-0 |
Arbitragem científica: | yes |
Acesso: | Acesso restrito UMinho |
Aparece nas coleções: | CDF - FMNC - Artigos/Papers (with refereeing) |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
art3A10.1007_Fs00340-016-6385-0.pdf Acesso restrito! | 2,33 MB | Adobe PDF | Ver/Abrir |