Please use this identifier to cite or link to this item: http://hdl.handle.net/1822/3185

TitleA low cost cell calibration technique and its PC based control software
Author(s)Ribeiro, António Fernando
McMaster, R. S.
KeywordsRobot calibration
Automatic calibration
Issue date1997
PublisherIEEE
CitationINTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS. (ISIE’97) Guimarães, 1997.“ (ISIE’97) International Symposium on Industrial Electronics”: [S.l.:s.n,1997]. ISBN-7803-3936-3
Abstract(s)In this study, a technique will be presented to measure the absolute position of a robot and any other strategic positions within the workcell, and also its specially built control software. One of the most important factors affecting the absolute or world accuracy of robots is the variation in arm geometry from a perfect kinematics form. Since arm position is essentially controlled by means of joint angles, Cartesian co-ordinates of the tool centre point are derived from the forward kinematics transform equations assuming a perfect kinematics form. Any deviation from this perfect case will result in world positional errors and hence, for effective off-line programming it is important to calibrate the real robot hardware against the virtual model used by the robot simulation computer systems. This paper will report on work carried out in developing such low cost calibration technique, its PC Based control software and performance monitoring systems.
TypeConference paper
URIhttp://hdl.handle.net/1822/3185
ISBN0-7803-3936-3
Peer-Reviewedyes
AccessOpen access
Appears in Collections:DEI - Artigos em atas de congressos internacionais

Files in This Item:
File Description SizeFormat 
17 isie97 - robot calib.pdf15,12 MBAdobe PDFView/Open

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu ORCID