Utilize este identificador para referenciar este registo:
|Título:||Biofabrication of customized bone grafts by combination of additive manufacturing and bioreactor knowhow|
|Autor(es):||Costa, P. F.|
Gomes, Manuela E.
Reis, R. L.
Hutmacher, D. W.
|Editora:||IOP Publishing Ltd|
|Citação:||Costa P. F., Vaquette C., Baldwin J., Chhaya M., Gomes M. E., Reis R. L., Theodoropoulos C., Hutmacher D. W. Biofabrication of customized bone grafts by combination of additive manufacturing and bioreactor knowhow, Biofabrication, Vol. 6, pp. 1-11, doi:10.1088/1758-5082/6/3/035006, 2014|
|Resumo(s):||This study reports on an original concept of additive manufacturing for the fabrication of tissue engineered constructs (TEC), offering the possibility of concomitantly manufacturing a customized scaffold and a bioreactor chamber to any size and shape. As a proof of concept towards the development of anatomically relevant TECs, this concept was utilized for the design and fabrication of a highly porous sheep tibia scaffold around which a bioreactor chamber of similar shape was simultaneously built. The morphology of the bioreactor/scaffold device was investigated by micro-computed tomography and scanning electron microscopy confirming the porous architecture of the sheep tibiae as opposed to the non-porous nature of the bioreactor chamber. Additionally, this study demonstrates that both the shape, as well as the inner architecture of the device can significantly impact the perfusion of fluid within the scaffold architecture. Indeed, fluid flow modelling revealed that this was of significant importance for controlling the nutrition flow pattern within the scaffold and the bioreactor chamber, avoiding the formation of stagnant flow regions detrimental for in vitro tissue development. The bioreactor/scaffold device was dynamically seeded with human primary osteoblasts and cultured under bi-directional perfusion for two and six weeks. Primary human osteoblasts were observed homogenously distributed throughout the scaffold, and were viable for the six week culture period. This work demonstrates a novel application for additive manufacturing in the development of scaffolds and bioreactors. Given the intrinsic flexibility of the additive manufacturing technology platform developed, more complex culture systems can be fabricated which would contribute to the advances in customized and patient-specific tissue engineering strategies for a wide range of applications.|
|Aparece nas coleções:||3B’s - Artigos em revistas/Papers in scientific journals|
Ficheiros deste registo:
|18028-Biofabrication of customized bone grafts by.pdf||1,58 MB||Adobe PDF||Ver/Abrir|