Utilize este identificador para referenciar este registo: http://hdl.handle.net/1822/24350

TítuloDispersion and re-agglomeration phenomena during melt mixing of polypropylene with multi-wall carbon nanotubes
Autor(es)Jamali, S.
Paiva, M. C.
Covas, J. A.
Carbon nanotubes
Nanocomposites Carbon nanotubes Polypropylene Dispersion
RevistaPolymer Testing
Resumo(s)The present work reports study of the dispersion and re-agglomeration of carbon nanotubes in a polymer melt using a prototype mixer that enables precise control over the processing parameters. Since dispersion of CNT in polymer matrices has been comprehensively studied in the literature, the focus here is to understand the spatial or temporal evolution of the process. Dispersion showed a far from gradual evolution and good correlation with the composite electrical resistivity. The effect of composite reprocessing on nanotube re-agglomeration and subsequent dispersion was also investigated. A large nanotube re-agglomeration was detected on composite re-melting, matching an increase in electrical resistivity. However, the efficiency of reprocessing in terms of rate and level of dispersion depends on the thermo-mechanical stresses created during the initial processing stage, as shown by data obtained for processing at two shear rates, and reprocessing performed at lower, identical and higher shear rates.
Versão da editorahttp://dx.doi.org/10.1016/j.polymertesting.2013.03.005
Arbitragem científicayes
Aparece nas coleções:IPC - Artigos em revistas científicas internacionais com arbitragem

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
Pol Testing 2013.pdfartigo1,3 MBAdobe PDFVer/Abrir  Solicitar cópia ao autor!

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu Currículo DeGóis