Please use this identifier to cite or link to this item: http://hdl.handle.net/1822/23227

TitleDetermination of the parameters affecting electrospun chitosan fiber size distribution and morphology
Author(s)Lanceros-Méndez, S.
Sencadas, Vítor João Gomes Silva
Correia, D. M.
Gómez Ribelles, J. L.
Botelho, Gabriela
Areias, A. C.
Fonseca, A. Maurício C.
Neves, I. C.
KeywordsChitosan
Electrospinning
Nanofiber
Processing
Issue date2012
PublisherElsevier Sci Ltd
JournalCarbohydrate Polymers
Abstract(s)The production of chitosan nanofiber mats by electrospinning presents serious difficulties due to the lack of suitable solvents and the strong influence of processing parameters on the fiber properties. Two are the main problems to be solved: to control the properties of the solution in order to obtain large area uniform fiber mats by having a stable flow rate and to avoid sparks during the process, damaging the fiber mats. In this work chitosan electrospun mats have been prepared form solutions of trifluoroacetic acid / dichloromethane mixtures, allowing to solve the aforementioned problems. Mats with uniform fibers of submicron diameters without beads were obtained. Further, the influence of the different solution and process parameters on the mean fiber diameter and on the width of the distribution of the fiber sizes has been assessed. Solvent composition, needle diameter, applied voltage and traveling distance were the parameters considered in this study.
TypeArticle
URIhttp://hdl.handle.net/1822/23227
DOI10.1016/j.carbpol.2011.09.017
ISSN0144-8617
Peer-Reviewedyes
AccessOpen access
Appears in Collections:CDF - FCD - Artigos/Papers (with refereeing)

Files in This Item:
File Description SizeFormat 
Chitosan_CP_2012.pdf827,17 kBAdobe PDFView/Open

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu ORCID